Instructions for use
(rev 150620)
e.ON
UGIN DENTAIRE
11
5.
START-UP
After checking that the mains voltage matches that noted on the rating plate, plug the cord into a standard
20A socket
with a ground terminal.
NOTE: If not used for a long time, switch off the power supply.
a)
Activate the breaker (ON/OFF) at the back of furnace.
b)
Following power up, the initialization interface appears
on the screen. The main screen automatically appears
as follows:
menu “Working interface”.
c)
Press button “
arrow key downward”
on touch screen. The platform moves down.
Remove the protections and dust with a vacuum cleaner or a soft and clean brush (do not use
compressed air).
DO NOT PLACE ANY OBJECT WHICH MAY HINDER THE ASCENT AND DESCENT OF THE PLATFORM
d)
First time
use, press the “
arrow key upward”
and “
arrow key downward”
on touch screen.
Check the alignment of the platform with the base of the chamber: movements must be made without
friction.
