Instructions for use
(rev 150620)
e.ON
UGIN DENTAIRE
5
-
For moving:
-
take hold the furnace by its base:
NEVER LIFT BY UPPER PART OF FURNACE
-
the furnace must remain in an upright position:
NOT HORIZONTAL POSITION
-
Never use the furnace without support.
-
Use only the
support,
tray for sinterizing and cover
provided by UGIN DENTAIRE. Before use,
check it (no dirt or damage).
If damage: do not use.
-
Respect the positioning of support (base and floor) and the maximum number of trays to
stack
(see chapter 6.7)
: damage equipment risk.
-
The chamber is made up refractory ceramic fibres.
-
Handle carefully.
-
They can release dust: remove with a vacuum cleaner - do not blow or use compressed air.
-
Use only
genuine spare parts
. The use of non-original spare parts voids any warranty for your
device.
-
Do not introduce stranger objects inside
the unit during the maintenance operations. It is
forbidden to modify the material without authorization.
-
Do not execute different operations of maintenance
from those brought back in the manual.
Whichever operation not included in this manual, can involve risks.
-
For whichever information concerning installation, maintenance and use, contact the
customer’s service UGIN DENTAIRE.
