UGO BASILE 47880-001, Instruction Manual

Page: 26 

< Librae instruction manual

Back to contents

Back to contents

Back to contents

4 Operation

4 Operation

Librae instruction manual >

 Page: 27

4.7 Utilities

UTILITIES menu (Figure 4.7.1) contains six submenus for setting the instrument, exporting data, 

checking results, and more. 

Figure 4.7.1

4.7.1 Update

This function allows you to update the software of the instrument. Before running the update 

procedure, check the installed firmware version (see Figure 4.1.3) and check Ugo Basile website 

for the latest version, (www.ugobasile.com)

To perform a software update:

FIRSTLY SAVE YOUR DATA AND EXPERIMENT BEFORE PROCEEDING!

Next:

1.  Download the software update from Ugo Basile website

2.  Copy the update file into a USB memory key. 

3.  Insert the USB memory KEY into Librae Incapacitance tester.

4.  Wait for update system icon (refer. to paragraph 4.1.1)

5.  Press Update button and wait for a reboot.

Figure 4.7.1.1

Now, the Librae Incapacitance Tester is up to date. An Erase DB could be necessary. Refer to 

paragraph 4.7.4 for details.

NOTE: DO NOT REMOVE USB memory key during update. The instrument will be damaged.

NOTE: Insert the USB memory key before update procedure. If not, Librae will show a warning 

message, WITHOUT performing update

NOTE: DO NOT MODIFY the update binary file.

4.7.2 Date-Time

Date and TIme menu allows to change the calendar and clock settings, as shown in FIgure 4.7.2.1.

Use the up/down arrows to adjust current time and date. Press OK to confirm

Figure 4.7.2.1

4.7.3 Advanced Settings

Advanced setting allows users to change the weight averaging parameter (Figure 4.7.3.1). Numeric 

values range from 1 sample to 10 samples. This parameter affects ONLY the visualization of the 

graph during the experiment.

NO DOWNSAMPLING OR DECIMATION WILL BE APPLIED TO MEASUREMENTS.

Figure 4.7.3.1