Ugo Marapi SL130, User Manual

• Installation does not require use of any tools
• Connect your hard drive to HDD Enclosure connector correctly

• Connect the USB cable with HDD Enclosure’s USB port and PC’s USB port
• The computer should detect the new hardware.
• No driver installation is needed while using the external enclosure with Windows 2000//XP/VISTA/Win7/Win 8 or above. 
• Connect the external HD to a PC’s USB 3.0 port. An icon should appear in the right corner of the task bar where indicates new 
hardware detected. 
• Click the icon [My computer] and a letter of the HD should appear.

If your hard disk does not appear in [My Computer] it means it has not been partitioned. Please follow “Format your hard disk”

Important!
Each time before unplugging the HDD enclosure from your computer, you should stop the hardware from the system tray 
(located at the right bottom corner of your computer screen). If you directly pull out the USB cable without stop operation, it 
may cause data loss or hardware damage. 

Thank you for purchasing external enclosure UGO Marapi SL130

Interface
Max transfer rate
Compatible drives
Max drive height
LED light
Material
Plug&Play
Hot Swap
Dimensions

USB 3.0 with UASP protocol
5 Gbps
2.5” SATA I / II /III
9.5mm
Yes
ABS
Yes
Yes
121x78x15 mm

SPECIFICATION

Please wear ground bracelet or touch metal faucet to release static electricity as the external enclosure’s PCB is very sensitive to 
static discharges.

CAUTION!

INSTALLATION

USB 3.0 port
Windows 2000/XP/Vista/Win7/Win8/Win 10
Mac OS 10.X or above 

SYSTEM REQUIREMENTS

EN

PL

2.5’’HDD Enclosure
USB 3.0 cable
User manual
Pouch

PACKAGE CONTENT

PRESS AND PUSH