23
original spare parts from the manufacturer.
2
In the event of strange noises, disconnect
the cooler and call for assistance.
3
In the event of a breakdown, disconnect the
machine as it may start again suddenly.
4
After all repair work, reposition every
component, such as the screws and covers, in
their original position.
5
Once a month: eliminate any dust that has
built up on the condenser filter situated at the
rear of the machine (see figure 18).
figure 18
8. 1 MAINTENANCE (TO BE
CARRIED OUT BY QUALIFIED
SERVICE PERSONNEL ONLY)
1
Once a month on the ICON 1 model
:
eliminate any dust that has built up on the
condenser. Unplug the dispenser beforehand.
2
Once a year
: it is advisable to remove all the
panels and clean inside, including the base and
the internal parts of the panels.
3
Once a year
: Check that the bushes on
which the mixers turn are perfectly round and not
worn. Replace them if necessary.
4
Never remove the anti-condensation material
around the outlet pipe of the evaporator (the
copper pipe to the right of the geared motor. If
this material is missing or worn out, replace it
w i t h o r i g i n a l s p a r e m a t e r i a l f r o m t h e
manufacturer.
5
In order to avoid damaging the dispenser,
lubricate the plastic parts only with the grease
provided by the manufacturer or with another
grease compatible with polycarbonate.
ATTENTION
Condenser fins are very sharp. Use
extreme caution when cleaning.
