·
Conecte la caja a su PC mediante el cable suministrado, luego conéctela al adaptador de
corriente.
·
Encienda el dispositivo, la luz roja permanece encendida.
4 Conectar el dispositivo a la toma de corriente
·
Apagar: mantenga presionado el botón de encendido (unos 3 segundos) hasta que el
indicador de encendido se apague.
·
Seleccione un modo de matriz basado en el diagrama de Modos RAID y Interruptor DIP, y
cambie el interruptor DIP "1/2/3" al estado correspondiente.
·
Mantenga presionado "RESET" y mantenga presionado el botón de encendido (unos 3
segundos) al mismo tiempo para encenderlo; después de 15 segundos suelte el botón
RESET. El cambio de modo se realiza correctamente si el indicador de disco duro parpadea
en blanco.
·
Vaya a Este equipo > Administrar > Administración de equipos > Administrador de
dispositivos, luego verifique el modo RAID actual.
Cambiar el modo por primera vez
No utilice el adaptador no estándar o no certificado en caso de riesgos potenciales.
Advertencia
IV Configuración y conexión del modo RAID
1 Cambiar modos RAID
·
Se recomienda que utilice los discos duros nuevos con la misma capacidad.
·
Si utiliza un disco duro antiguo, haga el favor de formatearlo antes de cambiar al modo RAID y
hacer una copia de seguridad de todos sus datos importantes.
·
El modo predeterminado del producto es el modo PM.
·
Vuelva al modo PM primero cuando necesite cambiar de modo, luego cambie al modo RAID que
prefiera.
Advertencia
Vhsffo!Mbshf!VTC!Efwjdf
Efwjdf!Nbobhfs
43
44