Umwelt-Geräte-Technik GmbH | Eberswalder Str. 58 | D-15374 Müncheberg | Tel.: +49 (0) 33 43 2 - 89 575 |
1.
Introduction
Thank you for choosing the hood infiltrometer IL -2700. This manual can help you understand
the IL-2700 features.
The hood infiltrometer is designed to measure the hydraulic conductivity of soils in virtually
saturated areas in field studies. No additional contact layer nor preparation of the soil surface
is necessary on the measurement area. This does not only save labor time but also enables
the measuring of the infiltration and the conductivity under completely natural conditions in
a destruction-free manner. The effective increase in pressure on the soil surface can be freely
selected between zero and a vacuum up to the bubble point of the soil.
There are several ways to contact UGT if you need a quote or product information please
contact
Email: info@ugt-online.de
For any technical assistance or feedback or in case of problems with your product please con-
tact
Email: support@ugt-online.de
We look forward to your inquiries or questions and are with pleasure at your disposal.Phone:
+ 49 (0) 33432 – 89 575
Fax:
+ 49 (0) 33432 – 89 573
If contacting us by email or fax, please include as part of your message your instrument serial
number, your name, address, phone, and a description of your problem or question.
Please read these instructions before operating your hood infiltrometer to ensure that it per-
forms to its full potential.
