DAISY
24
5
Special
Options
The DAISY Special Options can be edited using the DAISY
“Programming mode”.
Special
Option
Description
Range Default
0
Software version number (cannot be edited!)
-
-
1
DAISY serial number (cannot be edited!)
-
-
9
0=turnout positions not saved (analog mode)
1=turnout positions saved (analog mode)
0-1 0
11
LED brightness while operating as a DAISY-System:
0 = maximum brightness
3 = minimum brightness
0-3 0
12
LED brightness while operating as an add-on throttle:
0 = maximum brightness
3 = minimum brightness
0-3 1
13
Dynamic effect (rotary encoder) for 28 and 31 speed steps
locomotives:
0 = off
15 = maximum dynamic effect
0-15 5
15
0= DAISY-System (digital) does not generate any Motorola signal
1= DAISY-System (digital) always generates a Motorola signal
0-1 1
16
0= DAISY-System (digital) does not generate any DCC signal
1= DAISY-System (digital) always generates a DCC signal
0-1 0
17
Dynamic effect (rotary encoder) for 128 speed steps locomotives:
0 = off
15 = maximum dynamic effect
0-15 8
23
Maximum ‘on’ time for accessory decoders:
0 = as long as the corresponding key is pressed
1-15 = 0.3 through 2.3 seconds in equal steps
0-15 4
All Special Options can be reset to the factory settings by keeping the
[Stop] key pressed while either turning on the DAISY-System or
plugging the DAISY throttle into LocoNet.
Summary of Contents for DAISY
Page 1: ......
Page 25: ...DAISY 25 Power 2...
