Service manual
Compact electronic knob cylinder
6
3
Replacing the electronic knob
3.1
Relates to the following variants
CX6162/66
CX2162/66
3.2
Necessity of the measure
The electronic knob is faulty and has to be replaced.
3.3
Procedure
If the electronic knob is faulty, it can be replaced. This should only be done by trained personnel.
Remove the snap ring between the electronic knob and locking cam and pull the electronic knob gently
out of the cylinder.
CAUTION
Parts falling out of the cylinder
When pulling out the mechanical knob make sure that the
parts do not fall out of the cylinder.
