Service manual
Compact electronic knob cylinder
11
5
Replacing the cylinder for different dimensions
5.1
Relates to the following variants
CX6162/66
CX2162/66
5.2
Necessity of the measure
The cylinder dimensions have to be changed.
5.3
Procedure
The locking cylinder can be replaced for changing the cylinder dimensions. This should only be done by
trained personnel.
Remove the snap ring between the electronic knob and locking cam and pull the electronic knob gently
out of the cylinder.
CAUTION
Parts falling out of the cylinder
When pulling out the mechanical knob make sure that the
parts do not fall out of the cylinder.