CX2162/66
O
PERATION
17
6.4
Signals
Function
Signal (audible and visible) and explanation
Rest mode
No audible or visible signal
Programming
mode start
Long beep followed by a short beep
Programming
mode end
Short beep followed by a long beep
Key programmed
2 short beeps, LEDs glow green
Key cleared
2 long beeps, LEDs glow red
Read mode (after
waking)
Red LEDs start flashing
Key not authorised
Long low beep, red LEDs start glowing
Key authorised
Green LEDs start glowing
Timer circuit /
toggling On
Long loud beep, green LEDs start glowing
Timer circuit /
toggling Off
Long loud beep, red LEDs start glowing
Reset
Long low beep, all the LEDs are switched on briefly one after
the other
Battery warning
Phase 1:
5 short beeps, red LEDs flash 5 times simultaneously
Battery warning
Phase 2:
5 short beeps, red LEDs flash 5 times simultaneously, then 5
seconds engagement delay, green LEDs start flashing at the
same time
Battery warning
Phase 3:
5 brief audible signals, red LEDs flash 5 times simultaneously,
no connection but change battery position
Delete all keys
15 seconds short beeps, green LEDs flash simultaneously
▬
●
●
▬
▬
▬
▬
▬
● ● ● ● ●
● ● ● ● ●
● ● ● ● ●
5 s
●
●
▬
▬
15 s
● ● ● ● ●
