CX2172/4
T
ABLE OF CONTENTS
22
Insert the holder of the mechanical door handle from the other side and
screw it along with the electronic door handle through the door panel. Use
the supplied mounting screws.
Insert the mechanical door handle keeping it in a horizontal position. For
door handles pointing to the right, tighten the rosette towards the left, guide it
over the handle holder and engage the bayonet lock. Accordingly, tighten
the rosette towards the right for door handles pointing to the left.
Insert the locking screw from the bottom of the handle and tighten it.
Check the functionality and easy movement of the door handle with the door
open. The handle is already engaged when delivered.
When engaged, the catch of the lock should be completely inside the lock
casing when the latch is pressed down.
To operate the door handle, insert the battery and close the housing (see
chapter 7.2.17.2.1 Battery replacement). The electronic door handle
disengages only after the battery is inserted.
After holding up an authorized key for the first time, only the two upper LEDs
light up as an indication.