CX2172/4
T
ABLE OF CONTENTS
34
6
Operation
The electronic door handle operates only the latch. Hence it should be ensured
that the locking cylinder of the door is unlocked or the door is not locked in some
other manner. Otherwise, the door cannot be opened even after holding up an
authorized key.
6.1
Automatic wake up
The door handle is in sleep mode as long as it is not used. To check the
authorization of a key, it needs to be woken up from the sleep mode. This
normally happens automatically when a key is held in front of the reader unit.
If, however, the electronic door handle has been woken up 24 times (for example
by metallic objects in the surroundings) without reading a key, then automatic
wake up is disabled.
In this case the door handle has to be woken up manually.
Press the door handle a few times to wake up the reading unit, till an LED
starts glowing.
Hold up the key in front of the reading unit only after this.
The automatic activation is reactivated when an authorized key is scanned.
The wake up sensitivity (that is the number of times the door handle need to be
pressed to wake up the reading unit) can also be configured.
6.2
Opening the door
Precondition: Handle is in horizontal position.
Hold the authorised key in front of the reading unit till the green LED starts
glowing.
The door handle engages and the door can be opened by pressing the door
handle.
The time duration for which the door handle remains engaged can be configured
(1 to 15 seconds, the default value is 5 seconds). After successful authorization
(engaging) at the door handle, the engagement time starts counting down. The
engagement-time timer is reset as soon as the door handle is pressed.
The door handle disengages after the configured engagement time, if it is not
pressed or when it is pressed and held.
The door handle disengages immediately, if it is released.
