CX2192
O
PERATION
14
6
Operation
6.1
Waking up
Automatic wake-up is disabled for the cabinet lock in the delivered condition. To
check the authorisation of a key, it needs to be woken up from the sleep mode.
To wake-up the reading unit, press the button on the front of the cabinet lock
until the LED glows.
Hold up the key in front of the reading unit only after this.
6.2
Open / close the door
Wake up the cabinet lock by pressing the button.
Hold the authorised key in front of the reading unit till the green LED starts
glowing.
Open or close the cabinet by turning the operating lever by 90°. Immediately
after turning the lever, but after the locking time (default 5 seconds), the
cabinet lock disengages again.
Opening
Closing
6.3
Toggling the cabinet lock
Hold the key with toggle authorisation for two locking cycles in front of the
reading unit.
Depending on the initial state, the cabinet lock either engages or disengages
permanently.
