UHP SCPC MODEM
USER MANUAL, v3.2
© ROMANTIS 2015
39
www.uhp.net
Figure 43 Control panel statistics
The main screen shows the following settings:
Refresh
–
manual screen update;
SN
–
device serial number;
SW
–
type of active software;
Ver
–
current version of active software and its release date;
CPU load
–
CPU load (load above 60% is not recommended);
Buffers
–
% of free packet buffers;
Temp
–
internal device temperature (operation range: +0 to +60 degrees С);
Profile
–
duration of current profile operation status and the number of profile runs as of the
current moment.
7.3
Menu of Commands Statistics
Menu of commands allows the user to access the router settings and to view the status of the settings and
relevant statistics. The following symbols are used in the control tree:
– folder that can be opened;
– control icon showing settings;
– statistics icon.
Some elements may contain both settings and statistics. A click on the icon automatically opens the respective
setting.
7.4
Troubleshooting
Based on the information provided in UHP router WEB interface the user can look for and identify problems
related to the functioning of the device and of the communication channels associated with the device.
Troubleshooting of UHP router includes the following steps:
Fault identification;
Fault repair.
Section 1
Section 2
Section 3
Section 4
Section 5
