Page 20
M4220161122CN
UI Robot Technology Co. Ltd.
UIROBOT SCARA Robot
3.0
ENVIRONMENTS AND INSTALLATION
3.1
Environmental Conditions
A suitable environment is necessary for the robot system to function properly and safely. Be
sure to install the robot system in an environment that meets the following conditions:
Item
Conditions
Ambient temperature *1
-20
~
60
℃ (
with minimum temperature
variation
)
Ambient relative humidity
10
~
80%
(
No Condensation
)
First transient burst noise
2kV or less
Electrostatic Noise
6kV or less
Environment
-
Install indoors
-
Keep away from direct sunlight
-
Keep away from dust,oily smoke
salinity, metal
-
Keep away from flammable or
corrosive solvents and gases
-
Keep away from water
-
Keep away from shocks or
vibrations
-
Keep away from sources of electric
noise
Robots are not suitable for operation in harsh environments such as painting areas
etc.When using robot in inadequate environments that do not meet the above
conditions, please contact us.
*1 The ambient temperature conditions are for the robots only
。
Special Environmental Conditions
The surface of the robot has general oil resistance. However, if your requirements specify that
the robot must withstand certain kinds of oil, please consult your distributor.
Rapid change in temperature and humidity can cause condensation inside the robot.
If your requirements specify that the robot handles the food, please consult your distributor to
check whether the robot gives damage to the food or not.
The robot can not be used in corrosive environments where acid or alkaline is used. In a salty
environments where the rust is likely to gather, the robot is susceptible to rust.
Caution
★
When cleaning the robot, do not rub is strongly with alcohol or benzene.
It may lose luster on the coated face.