Assembly
22
Step 5 Locate the fence assembly (K), ‘T’ bolts (d) and flat
washers (i). Insert six ‘T’ bolts into the pre-drilled holes in
the fence (K), place a washer (i) on each ‘T’ bolt and screw
on the locking knobs (b), see figs 40-41.
Fig 39
Fig 40-41
g
b
i
K
Step 6 Locate the two adjustable wood faces (Q), lineup
the ‘T’ bolts (d) with the ‘T’ slots in the wood face (Q) and
slide on the wood face, lightly tighten, see fig 42. Repeat for
the other side.
d
Fig 42
Q
d
Step 7 Locate the two locking handle knobs (a) and flat
washers (i). Line up the machined slots in the fence (K) with
the two locking Hex nuts (g) in the fixing bracket (P). Place a
washer (i) over the thread on the locking handle knobs (a),
screw the handle knobs through the fence base clamping
the fence assembly to the table top, see fig 43.
Fig 43
K
a
i
Machined slot
Step 8 Clamp down the fence assembly. Loosen the two
locking knobs beneath the fixing brackets (P), slide the two
scales until it reads (ZERO) to the front face of the fence
assembly, lightly tighten the locking knobs. see figs 44-45.
Fig 44-45
Locking knob
Scale
Summary of Contents for 717127
Page 7: ...What s Included 7 K L M N O P Q a b c d e g h i j N f...
Page 33: ...Exploded Diagram Parts List 33...
Page 38: ...Notes 38...
Page 39: ...Notes 39...