UK Tents ECONOMY Prime 3m Series Quick Start Manual Download

Page: 1 / 8

3m - series



ECONOMY Prime

Party Tent PE

Please read instructions COMPLETELY before assembly. This tent MUST be securely anchored.

This tent is a temporary structure and should be disassembled at harsh weather conditions as stormy winds,

snowfall or ice.

Warnings

Prior to installation, consult with all local municipal codes regarding installation of temporary shelters. The

owner of the tent has the sole responsibility to make sure that these local rules are followed and that the

mounting is correct.

We are not responsible for damage to the unit or the contents from acts of nature.

It is always recommended that you secure your tent properly with storm straps and ground pegs when you

put up the structure. Proper Anchoring system selection is your responsibility. Heavy duty Anchor are sold

separately and are not included in this product.

Periodically check the anchors to ensure stability of shelter.

In case of extreme weather conditions, the tent cover must be removed.

Any shelter that is not anchored securely has the potential to fly away causing damage. We are not

responsible for any shelter that blows away.

This canopy is intended to protect against the effects of sun, rain, light snow, etc. It is not designed to hold

the loads that can accompany wind, rain, snow or ice storms. This structure is not tested for specific snow,

rain and wind loads.

Do not use open fire, welding equipment or other ignition sources in the tent.

Cleaning and Storage

Summary of Contents for ECONOMY Prime 3m Series






