8
9
Step 11.
Place the
mounting reference
guide sticker onto the
wall where you wish to
install the TimeBase.
Install the four drywall
anchors using the
guide.
Step 14.
Align
the mounting
plate with the
four holes on the
mounting box,
and install using
the four flathead
Phillips screws
provided.
Step 12
. Align the
mounting box with
the anchors on the
wall, and secure
the mounting box to
the wall using the
provided screws.
Ensure power and
Ethernet cables are
not crushed between
the box and the wall
by routing them
through the provided cutout. If you have a peripheral
reader, ensure the USB extender is not crushed.
Step 13.
Pass the
power and Ethernet
cables through the
cutout on the mounting
plate, as shown.
Step 16.
Slide the
TimeBase clock down
onto the hooks of the
mounting plate, and then
flat onto the mounting
plate itself. You may
need to gently pull the
power and Ethernet
cables to take up slack.
Step 15.
Connect the
power and Ethernet
cables to the back of the
TimeBase, as shown.
