background image

DO 

Keep your legs extended and straight 

when using footrest as an ottoman

DO NOT

Apply pressure or bend your legs when 

footrest is protruded, as this will cause damage 

to the retracting mechanism.

INSTALLATION GUIDE

PRODUCT MAINTENANCE

Do not apply pressure to the retracting footrest when it is in motion. After the 

massage program has ended, remove your legs from the footrest so the 

mechanism can retract safely.

1. When The Footrest Is Not Extended, Please Do Not Recline The Backrest.

2. When The Backrest Is Fully Reclined, Do Not Retract The Footrest Into The Chair.

3. Please Remove Your Legs And Feet From The Footrest When It Is Moving Or Retracting. 

Failure To Do So May Lead To Bodily Damages As Well As Mechanical Damages To The Chair. 

Please make sure there is enough space infront as well as behind the chair for reclining. 

The Bella requires 18

 (45cm) behind the chair, and 26  (65cm) infront of the chair to operate. 

Please use care when reclining and ascending the massage chair, 

make sure there are no children or pets nearby when the chair is in motion. 

Please make sure the power cord is not obstructed or caught by the 

chair or other objects. We recommend using an area rug underneath 

the chair to avoid possible damage to flooring.

17

16

Summary of Contents for Bella












Reviews: