INSTALLATION GUIDE
INSTALLATION GUIDE
Step 1: Remove the massage chair from the carton
DO
Lift the massage chair by placing
both hands under the
side panels as shown.
DO NOT
Pull out or lift the retractable foot rest,
as this will damage the machine.
If one s doorway is exceptionally narrow, and the chair cannot fit through fully
assembled. Please follow the instructions below to remove the left arm panel to
allow for fitment through tight spaces.
Locate and remove the screw in between
the back cover and the arm panel at the
rear of the chair. Use a Philips screwdriver
to carefully remove the screw by hand.
Near the front of the arm panel, lift the
seat cushion to reveal a hex bolt connecting
the chair to the arm panel. Unscrew the
bolt using your fingers, or use a suitable
hex tool if necessary.
Disconnect the air tubes and power cord
located between the chair and the panel.
Pay attention to the labels on each tube
to reconnect them correctly afterwards.
13
12
