10 EASY STEPS
(continued from page 5)
6. Repeat process allowing 3 minutes for
water to cool.
7. Wipe the outside of the dispenser,
including the faucets.
8. Drain reservoir completely. Place a new
full bottle of water on top of the dispenser.
9. Remove air from the hot tank by activating
the hot water dispenser button until water
flows freely from faucet.
10. Plug in the power cord and in less than
an hour, you can enjoy hot and cold water
from your clean dispenser.
PARTS IDENTIFICATION
6
Dispenser
Rear View
Dispenser
Front View
Hot Water Button
Cold Water Button
Drip Tray
Cold Water
Thermostat
Hot Water
Switch
Water
Drain Cap
Baffle
Cold Water Tank
Cold Water Tank
Baffle
Top View
Hot Water
Control
