background image

T356 User Manual 

---5--- 

 

1.Introduction 

T356 is a WIFI, 0 use-cost OBD II GPS tracking device. It's the built-in high 

capacity flash for two weeks data storage. The built-in WIFI functionality supports 

the device to synchronized  the all full storage data to the server within quite a 

short time. T356 can be preset more than 1600 WIFI AP information to support  

the device sending the data  to the server more easy and quickly. Just like during 

the vehicle refueling, the device could be upload the data to the server via the 

preset AP. The internal GPS and OBD functions support to real-time recording and 

analyzing GPS and OBD data, including mileage and fuel consumption data 

statistics. It's integrated the 3-axis accelerometer can be real-time monitored 8 

kinds of bad driving behavior. It's built a power-cut output and a configurable input 

circuit to facilitate the device's extension functionality. 

1.1 Reference document 

Index  Document Name 

Ulbotech Tracking Device Communication Protocol 

Tracking Device VCP driver installation user manual 

Tracking Device Configuration Software manual 

OBD tracking device immobilizer installation user guide 

Tracking Device File Import & Export Software manual 

 

Summary of Contents for T356





















Reviews: