REPLACING THE FUSE
CAUTION! The fuse must be replaced by a specialist!
1.
Disconnect the unit from the power supply.
2.
Disconnect the power cord and remove the fuse holder.
3.
To remove the fuse, turn the fuse handlec ounterclockwise.
4.
Replace the fuse with a new one of the same rating.
5.
Reinstall the fuse holder.
CAUTION!
To avoid damaging the fuse holder, do not use excessive force when
removing and installing the fuse holder.
DISPOSAL OF USED UNITS.
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
electrical and electronic equipment. This is indicated by the symbol on the
product, operating instructions or packaging. The materials used in this unit are
recyclable according to their marking. You will be making an important
contribution to protecting our environment by reusing, recycling or otherwise
disposing of used units.
Your local administration will provide you with information about the
appropriate disposal point for used units.
TROUBLESHOOTING
Problem
Possible cause
Action
The unit does not
work.
Improper connection of the
cable to the power outlet.
Check that the cord is
properly plugged into the
power outlet.
The plug is not properly
connected to the electrical
outlet.
Check that the plug is
properly connected to the
electrical outlet.
The electrical outlet does
not work.
Check that the electrical
outlet is working properly.
The unit is not
working properly.
The ozone plate is
dirty/cracked.
Check that the ozone plate is
clean and dry with no cracks.
Any cracks on the ozone
plate can cause visible
lightning and lack of ozone
output.
Blown/incorrectly installed
fuse.
Check that the fuse is
properly installed and in
good condition.
