Page 10
Safety
LAS 260.1
– Date 07/2023
Occupational safety
DANGER
Before installing the unit and taking it into operation, make sure
that you read and carefully follow the operating instructions, in
particular the safety instructions.
The user must be given instructions and trained by an authorized
person during initial commissioning. Personnel must be informed
about all instructions relating to occupational safety, about
prohibited methods of operating the unit, and about potential
hazards.
The machine must only be operated, serviced, and repaired by
authorized, trained, and instructed personnel who satisfy the
legal minimum age requirements.
All work on electrical and mechanical components in the
machine must only be carried out by instructed personnel or by
persons working under the guidance and supervision of an
instructed skilled person in accordance with the applicable
regulations and standards of electrical and mechanical
engineering. Here, a “skilled person” is someone who, based on
their professional training, knowledge, and experience as well as
their knowledge of the relevant standards and regulations, is
able to assess the work assigned to them and identify potential
hazards.
DANGER
-
Always disconnect the mains plug after use, before
cleaning or maintenance of the LAS 260.1, and before
replacing any parts.
-
Saturated filter materials must always be disposed of in
accordance with the applicable waste regulations.
-
Always use genuine replacement parts and wear parts
from ULT AG.
-
Improper interventions or tampering pose a significant
safety risk.
-
Never use jet washing equipment to clean the
LAS 260.1.
-
Safety devices that are designed to prevent or eliminate
hazards must be regularly serviced and must be tested
at least once a year to make sure that the required
safety functions work properly.
-
It must be ensured that the mains connection cable
cannot be damaged due to heat, oil, by equipment
running over it, or by pulling, straining, or similar.
-
The mains connection cable should be regularly
inspected for signs of damage.
Summary of Contents for LAS260.1
