www.ultega.net
12
US
CARE AND MAINTAINANCE
TROUBLE SHOOTING
DISPLAY OF APPLIANCE
Old appliances may not be disposed of as
domestic waste!!
Should it no longer be possible to use the appliance or
the network adapter, then the consumer is legally obliged
to separate old appliances from domestic waste and to
return them to a collection point of his municipality or
urban district.
During the exercise session the computer no longer
counts units.
The pulse display does not function or is faulty.
The pedal resistance cannot be adjusted.
Computer displays malfunction.
Attention: Always remove plug from socket before
cleaning or maintenance!
Sweat, dust and dirt particles can change and damage the
surface of your Ergometer after just a few weeks. This is
why it’s important to clean the Ergometer regularly. Use
only mild, standard detergents for cleaning. Do not clean
the Ergometer with water but only with a moist cloth.
Attention: Never use aggressive detergents or
solvents. These will damage the plastic parts.
This ensures that the old appliances can be processed
appropriately and negative environmental efects are
avoided.
This is why electrical appliances are marked with the symbol
illustrated here.
Check that the jack of the network adapter is properly
inserted. Check that the power socket is working by plugging
in another appliance. Check the jack connections within the
Ergometer (see “Assembly” chapter).
The program may have been interrupted. Start it again with
the START/STOP key.
Place both hands simultaneously on the pulse sensors.
Press the START/STOP key and select a program. If necessary
adjust the pedal resistance with the UP/DOWN keys.
Remove the power plug from the socket. Wait a few seconds
and then re-insert it in the socket.
In order to maintain the high safety level, regularly check the
Ergometer and the network adapter for damage and wear.
These checks should be carried out at least once a month.
Defective parts must be replaced immediately. The
Ergometer must not be accessible to users while it is under
repair! Parts such as the grips and the pedals are particularly
subject to wear. Always ensure that securing bolts and nuts
have not become loose.
No display or no function.
