background image

www.ultega.net

20

US

   

WARM-UP AND COOL-DOWN

WORKOUT GUIDELINES

Each workout should include the following three parts:

A warm-up, consisting of 5 to 10 minutes of stretching and light exercise. A proper warm-up increases 
your body temperature, heart rate, and circulation in preparation for exercise.

Training zone exercise, consisting of 20 to 30 minutes of exercising with your heart rate in your training 
zone. (Note: During the irst few weeks of your exercise program, do not keep your heart rate in your 
training zone for longer than 20 minutes.)

A cool-down, with 5 to 10 minutes of stretching. This will increase the lexibility of your muscles and will 
help to prevent post-exercise problems.

Exercise Frequency
To maintain or improve your condition, plan three workouts each week, with at least one day of rest 
between workouts. After a few months of regular exercise, you may complete up to ive workouts each 
week, if desired. Remember, the key to success is when exercising becomes a regular and enjoyable part 
of your life.

SUGGESTED STRETCHES

The correct form for several basic stretches is shown at the right. Move slowly as you stretch-never 
bounce.

1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward from your 
hips. Allow your back and shoulders to relax as you reach down toward 
your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times. 
Stretches: Hamstrings, back of knees and back.

2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot toward 
you and rest it against the inner thigh of your extended leg. Reach 
toward your toes as far as possible. Hold for 15 counts, then relax. 
Repeat 3 times for each leg. Stretches: Hamstrings, lower back and 
groin.

Summary of Contents for XT 800A




























Reviews: