119
the PIP channel. In case of 4 or 9 channel screen, it changes the screen to a next one in the sequence.
-
FREEZ
: freeze a current image.
-
SETUP
: pop up Setup window.
-
PLAY/PAUSE
: play/pause recorded data in play mode.
-
SEARCH
: pop up Search window, or switches play mode to search mode.
-
ZOOM
: zoom in a current image.
-
JOYSTICK (REW)
: rewind in sequence of 2X, 4X, 8X, 16X, 32X, 62X, Extreme in play mode.
-
JOYSTICK (FF)
: fast forward in sequence of 2X, 4X, 8X, 16X, 32X, 62X, Extreme in play mode.
-
JOYSTICK(SETUP)
: operate with direction keys if Setup window is popped up. (up/down/left/right).
-
ENT
:
view a channel in full screen (by selecting a number with ENTER button).
13.4.3 PTZ Control Mode
Push
once to exit DVR mode and turn PTZ mode.
Press number keys + “ENT”(Hold for a while until double beep sounds) key to change to Camera ID that wish to control. If
there is a corresponding Camera ID, a full camera image will show up and PTZ control is possible.
It is able to control 255 devices.
PSET
:
-
Preset save : Number keys + PSET (Hold for a while until double beep sounds).
-
Preset shift : Number keys + PSET
TELE
: Zoom Out
WIDE
: Zoom In
(NOTE)
When a Key does not Work after Set up
-
If the communication speed of DVR and CP are not co-related, it may not work. Please make sure the Baud rate of Keyboard sets on
9.6kbps.
-
Press the button to enter PTZ mode and switch to DVR mode again.
-
Please reboot the DVR.
When Tx Blinks Continually on the LED Window
-
If Tx blinks continually without any operation, it may be mistakenly set up for Joystick.
-
OFFSET of the Joystick may not appropriately set up.
-
Please touch the Joystick and position it on the center.
