background image

 

Page 

7

 of 

24

 

Issue: 5 - 13/02/2019 
 

5. Important Safety Information 

 

Please read all instructions prior to using any Ultimate Healthcare supplied product. The Tamora Plus 

II dynamic mattress replacement system must be used in accordance with this User Manual. 

 

 

The mattress must only be operated by personnel who have been properly trained or have 

suitable experience with products of this nature. 

 

Ensure a clinical Risk Assessment is conducted, which should take account of the suitability of 

use of 

this product, patient’s condition, any ancillary equipment in use and the surrounding 

environment. This should include assessing the use of side rails, head and footboards etc. 

Pressure settings should be advised or prescribed by a medical practitioner. 

 

Only personnel trained or formally approved by Ultimate Healthcare in operation and 

maintenance of Ultimate Healthcare products may perform maintenance; modification or repair 

work on any Ultimate Healthcare supplied product. 

 

Ensure the power cable is not trapped or twisted and is routed suitably to avoid crushing or 

entrapment when connected to the product. 

 

Do not use your mattress system power unit in the presence of flammable gases. This excludes 

oxygen cylinders. 

 

Avoid hazards caused by inappropriate handling of the power cable e.g. by kinking, shearing or 

other mechanical damages. 

 

The power cable for this product must be unplugged from the mains power outlet socket and 

suitably stowed before moving, cleaning or maintenance activities. 

 

Do not secure mattress straps to removable head or footboards or any fixed (non-moving) parts 

of a profiling bedframe.

 

 

Disconnect from mains (power supply) before cleaning the power unit. 

 

When cleaning do not immerse the power unit in water.

 

 

Use only the cleaning and disinfectant agents recommended in this User Manual. 

 

When connecting product after transportation or storage, inspect the power cable visually for any 

signs of damage. If evident, do not use product and contact Ultimate Healthcare or your local 

distributor for repair.

 

 

When storing, ensure the product is stored away from direct sunlight and extreme cold conditions. 

 

Never block the air openings of this product or place it on a soft surface, such as a bed or couch, 

where their openings may be blocked. Keep the air opening free of lint, hair, and other similar 

particles. Air ventilation through the power unit is vital for correct and safe operation. 

 

If this product is used for any activity other than detailed within this User Manual then personal 

risk to the end user or patient may occur. Ultimate Healthcare shall not be held liable/responsible 

for such an event. 

 

Do not smoke, or allow the patient to smoke when using this product. Keep all possible ignition 

sources clear of this product 

Summary of Contents for Tamora Plus II

























Reviews: