UCFX3-P2V
For more information contact :
T:
+44 (0) 1902 451 451
F:
+44 (0) 1902 451 276
E:
sales@ultimateindustrial.co.uk
www.ultimateindustrial.co.uk
U l t i m a t e I n d u s t r i a l L i m i t e d
V i c t o r i a H o u s e ,
C o l l i e r y R o a d ,
W o l v e r h a m p t o n , W V 1 2 R D
U n i t e d K i n g d o m
FFP2 NR D Respirator
PROTECTION LEVEL
P2 Protection
This document and any other statement provided herein by or on behalf of UCi are given for informational purposes and do not constitute a contractual agreement nor warranty of merchantability. UCi assumes no responsibility for the suitability or adequacy of an end user’s selection of product for a specific purpose.
UC
Ultimate
I n d u s t r i a l
UPDATED: 10/2017
ISSUE NO: 2
OUR REF:
UCFX3-P2V
PRODUCT DESCRIPTION
Space saving three panel fold flat
respirator designed for single use. Light
and comfortable with foam nose seal,
adjustable nose clip and comfort valve.
Tri-fold design for extra space for added
comfort and lower breathing resistance.
Colour coded for easy identification of
protection levels. Dolomite tested.
Maintenance free.
RETAIL PACKAGING AVAILABLE:
Yes
AVAILABLE SIZES:
ONE SIZE
PACKAGING: Per Box: 10
masks
Per Case : 200
masks
(20 boxes of 10 masks)
PROTECTION LEVEL:
Blue
NOTE:
A properly selected respirator is
essential to protect your health. Before
using this respirator consult a suitably
qualified Safety Professional to determine
the suitability of the product for your
intended use.
Respiratory protection is only effective if correctly selected,
fitted and worn for the complete period of exposure to hazards
- Read ALL instructions and warnings carefully before use.
1. Hold the mask in hand with the nose-piece up. Allow
headband to hang freely and gently open mask.
2. Position the mask under the chin covering mouth and nose
and pull the headband over the head and position behind head.
3. Press soft nose piece to conform snugly around the nose.
4. To check fit, cup both hands over the mask and exhale
vigorously. If air flows around nose, tighten the nosepiece. If air
leaks around the edge, reposition the headband for better fit.
Retest the seal and repeat the procedure until the mask is
sealed properly.
INSTRUCTIONS FOR USE:
Instructions
Fitting
Fitting
Instructions
STEP 1:
STEP 2:
STEP 3:
STEP 4:
