Ultimate Jets
B300F User manual rev5.
1st June 2014
28
Tygon tube. This will prevent slippage of the felt body.
Then secure the Tygon tube connections with wire. Again, check for leak
tightness.
Weld the battery cable to your chosen
battery. Red = plus, black = minus.
We recommend a good quality 3S
Lipo of a capacity of at least
3500mAh
and
30C
discharge
capacity have proven to be ideal for
turbines of type
B300F
. Energy
consumption is roughly 450
– 550
mAh, depending on your style of
flying, for a 8 minutes flight and cool
down period.
When using a nozzle extension with
your model, the diameter of the
extension pipe and the distance from
nozzle to nozzle extension must be
correct. With
B300F
turbines the
entry diameter of the extension pipe
should be around 130mm while the
end diameter should measure around
110mm. The shorter the nozzle
extension the smaller the loss of
power.
When using BF Turbines nozzle
extension pipes for
B300F
type
turbines, the distance from the end of
the aluminum turbine housing to the
aluminum hopper should be 3
– 4 cm.
The extension pipe must be securely
attached to the model.
