8 GB/IE
m
CAUTION!
Never exceed the maximum load for each pair of axle stands. Excess
load may damage the axle stands or destroy them completely. Always position
the load in the middle of the ramp! Always use the axle stands 2 at a time on
a level surface which is able to take the weight. Using the axle stands on a
surface which cannot take the weight may lead to uneven weight distribution
and possible complete loss of load-bearing capacity. Do not use on gravel. Non-
observance of these instructions may cause damage of the axle stands, loss of
the load and therefore to property damage, severe personal injury or a fatal
accident.
Use this product only with the components described in the instructions and use it only for the
intended use.
Support the raised weight immediately with the axle stands.
§
Scope of delivery
§
Assembly Instructions
1
2
3
4
USING THE AXLE STANDS
1. Familiarise yourself with the function and components such as the folding mechanism and
adjustable legs. Check that the axle stands are in perfect working order.
2. Install the middle pole through the middle hole at the required height and secure it with the holding
bolt.
Note:
During use, always push the pin through the support and insertion pipes.
