- 2 -
HYDRAULIC TROLLEY
JACK KH 3046
Intended Use
The Trolley Jack is intended for the short term lifting
of motor vehicles and only for domestic use.
This trolley jack is not designed for lifting people,
to permanently hold a vehicle in a raised position
and is not intended for use in commercial or
industrial areas.
Safety instructions
• Only use the Trolley Jack if it is in a faultless
condition. The appliance may not be used if it
has been visibly damaged!
• Use the Trolley Jack only for raising and lowe-
ring motor vehicles – not for holding them in a
raised position. Secure the vehicle in the raised
position with axle stands to prevent it from
dropping suddenly.
• Before raising, ensure that the vehicle cannot
roll: Apply the handbrake and place wedges
against the wheels not being raised.
• Only use the Trolley Jack on firm and level
surfaces. This will help prevent the vehicle from
rolling, or shifting while it is being raised.
• Never use the Trolley Jack at an oblique angle
to the vehicle.
• This appliance is not intended for use by individuals
(including children) with restricted physical, physio-
logical or intellectual abilities or deficiences in
experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
appliance is to be used.
• Children should be supervised to ensure that
they do not play with the appliance.
• Never overburden the Trolley Jack – also not for
a short period!
• Never use the Trolley Jack to shift a raised
vehicle. The Trolley Jack is not designed to cope
with the loading that this would cause!
• Do not grip between the lifting arm and the
housing of the Trolley Jack. Thus you can avoid
crush injuries when the lifting arm moves itself.
• Ensure that no one is in or under the vehicle
when raising and/or lowering it. Otherwise
there is a danger of accidents.
Technical data
Lifting capacity:
2000 kg
Lifting height:
ca. 135 - 342 mm
Rotation range for
lifting lever:
180°
Hydraulic oil for Trolley Jack
Oil viscosity :
SAE 10
Description of the appliance
q
Lifting lever
w
Loading plate
e
Carrying grip
r
Release valve
t
Lifting lever collet
IB_KH3046_DIE43192_LB4 15.09.2009 13:32 Uhr Seite 2
