25
GB/IE/NI/CY/MT
Using the device
Note
:
Charging is not possible if the portable jump starter
1
with power bank is being charged itself.
z
Using the 12 V DC output 8 A
with cigarette lighter adapter
Press the power switch
7
.
Connect the 12 V/8 A cigarette lighter adapter
14
on the 12 V DC output 8 A
3
to your portable jump
starter with power bank
1
und then connect it to your
terminal device.
Note:
You will not be able to use the portable jump star-
ter with power bank
1
if it is being charged.
Caution:
Only use the 12 V/8 A cigarette lighter
adapter delivered with your product
14
. There is a risk of
a short circuit if you use third-party adapters.
z
Switch on lighting
Light mode
When switching on the LED lights
2
, hold down the
power button
7
for 3 seconds.
Press and hold the power button
7
again for 3 se-
conds to turn the LED lights
2
off again.
Flash mode
To switch on the LED light
2
in flashing or SOS
mode, first press and hold the power switch
7
for 3
seconds. Then the LED light
2
will be permanently lit.
Briefly press the power switch
7
once again and the
LED light will switch to flashing mode.
Briefly press the power switch
7
once again and the
Summary of Contents for UMAP 12000 B2
