ULTIMATE SPEED UPK 10 A1, Operation And Safety Notes

GB / IE / NI 

 7

• Intended use

This power bank with compressor (also referred 

to in this manual as the ‘device’ or ‘product’) is 

designed to provide additional support to 12 V 

vehicle batteries in diesel and petrol vehicles 

experiencing start-up problems caused by batter-

ies that are weak, empty or defective� However, 

the power bank with compressor cannot replace 

the vehicle battery� If no more than 400 A are 

needed for starting (max� peak current), the 

power bank lets the user single-handedly start the 

vehicle when necessary, without additional help 

from a third party� The power bank with com-

pressor is also fitted with a USB port� This means 

that mobile phones, satnavs or other USB-ena-

bled devices can also be charged if needed� The 

integrated compressor is designed to generate 

pressure in tyres (e�g� vehicle and bicycle tyres), 

balls and other small-scale inflatable articles� Do 

not use the compressor to inflate articles with a 

large volume, since it can overheat rapidly in 

the absence of back pressure� This power bank 

with compressor is not designed for continuous 

operation to generate pressure of over 3 bar�

Any other use may cause damage to the device 

and expose the user to a risk of serious injury� 

The manufacturer is not liable for any injury or 

damage resulting from improper use or incorrect 

operation� This power bank with compressor is 

not suitable for commercial use� Commercial use 

will void the guarantee�

This device has been developed for consumer 

use and is not suitable for use in a commercial 

or industrial environment�

The lamp is not suitable for domestic 

room lighting�

-20°C

The LED bulb is suitable for extreme tem-

peratures below -20 °C�

• Features

After unpacking the product, please check that 

all of the package contents are present and that 

the power bank with compressor is in perfect 

condition� Do not use the device if it is defective�

1

Lamp

2

On/off switch for compressor

3

 Pressure gauge with pressure display  

(not trade-approved)

– In bar: red scale

– In psi: black scale

4

On/off switch for power bank

5

Indicator lights

6

Power bank with compressor

7

Vehicle jumpstart outlet

8

On/off switch for power bank  

with compressor

9

Charging port 15 V

/1 A

10

USB port 5 V

/2 A

11

Jumper cable

12

Clamp lever

13

Valve adapter 

a+b: for inflatable items

c: for balls

14

Air hose

15

Connecting valve

16

AC adapter

17

USB cable

• Technical specifications

The three individual cells used to construct the 

rechargeable battery are connected in series to 

produce a total voltage of 3 × 3�7 V = 11�1 V 

and a capacity of 4700 mAh� The battery output 

produced in this way is the same as the output 

from a rechargeable battery with a total capac-

ity of 14000 maH at 3�7 V�

Model:  

UPK 10 A1

Battery type:  

lithium-ion

Battery capacity:  

14,000 mAh, 3�7 V

Charge cycles:  

1,500

Charging time:  

up to 8 hours

Peak current:  

400 A

Starting current:  

200 A

Operating temperature:  -21 to +55 °C

Voltage:  

12 V

Introduction