37
GB/IE
Connecting the compressed
air hose without a valve
adapter
Screw the free end of the com-
pressed air hose
17
directly on
to the connection valve of the
inflatable item.
Connecting the compressed
air hose with a valve adapter
The valve adapters
21
,
22
and
23
are located in the storage com-
partment for the valve adapters
14
(see Fig. B).
First screw the required valve
adapter
21
,
22
or
23
to the free
end of the compressed air hose
17
.
Then insert the valve adapter
21
,
22
or
23
into the connection valve
of t
he inflatable item (if nec
essary
remove the valve cap of the
inflatable item).
Remove the compressed air
hose
Connection without valve
adapters
21
,
22
or
23
: Screw the
compressed connection hose
17
off the valve of t
he inflatable
item.
Connect with the valve adapter
21
,
22
or
23
: First, pull the valve
adapter off the connecting valve
on t
he inflatable item. Scr
ew the
valve adapter
21
,
22
or
23
off the
compressed air hose
17
(if neces-
sary, reattach the valve cap on to
t
he inflatable item).
Note:
When disconnecting the
compressed air hose
17
, air
can escape from the valve of the
inflatable item. Ensur
e that you
remove the compressed air hose
17
as quickly as possible.
Pressure Preselect Function
Switch on the powerbank with
compressor
1
by using the switch
for the powerbank
9
.
Connect the compressed air hose
17
of the powerbank with com-
pressor
1
to t
he inflatable item
which
you want to inflate.
To do
so, please proceed as follows.
Use the “M” menu button
5
to select the desired unit of
pressure. The units available are
bar (“bar”), kilopascal (“KPa”),
kilogram per square centimetre
(“KG/CM²“) and pound per
square inch (“PSI”) (see Fig. E).
Use the “+” button
3
and the
“-” button
4
to select the desired
pressure. To speed up the selec-
tion, you can keep the respective
button pressed down. Pressure
settings between 0.3 bar and
3.5 bar are possible in 0.05 bar
steps (see Fig. E).
Note:
While preselecting the
pressure, the digital pressure gauge
wil
l flash wit
h the pressure display
6
. If a button is not pressed for at
least 10 seconds, the display will
revert to “0”.
Using the device
Summary of Contents for UPK 10 C1
