ULTIMATE SPEED UPM 120 B1, Original Instructions Manual

5

GB

IE

NI

CY

Functional description

The device is designed for waxing and 
polishing or dewaxing of vehicle varnish. 
Rotating the polishing disc helps achie-
ve a consistent mode of operation. The 
polishing bonnets can be exchange for 
different applications and detachable for 
cleaning.

Overview

 1  Handle

2  ON / OFF switch

3  Polishing disc

4  2 Synthetic fur covers

5  2 Towelling covers

6  Mains cable

Technical speciications

Electric polisher ........... UPM 120 B1

Rated input voltage (U) 230-240 V~, 50 Hz
Power input (P) ............................ 120 W 
Idling speed (n

0

) .....................3500 min

-1

Safety class .....................................

 II

Protection category ..........................IPX0
Weight .................................. ca. 2.3 kg
Sound pressure level 

(L

pA

) ................... 61.7 

dB(A); K

pA

= 3 dB

Sound power level (L

WA

)

measured ..........

72.7 dB(A); K

WA

= 3 dB

guaranteed ........................... 76 dB(A)

Vibration (a

h

) .....17.543 m/s

2

;

K= 1.5 m/s

2

Levels of noise and vibration were determi-
ned according to the norms and regulati-
ons in the declaration of conformity.

-  The speciied total vibration values and 

the stated noise emission values have 
been measured according to a standar-
dised test method and can be used to 
compare one power tool with another.

-  The speciied total vibration values and 

the stated speciied noise emission va

-

lues can also be used for a provisional 
assessment of the load.

 Warning: 

The vibration and noise 

emissions may deviate from the spe-

ciied values during actual use of the 

power tool, depending on the type 
and manner in which the power tool 
is used – and in particular which 
type of workpiece is processed.

Try to keep the exposure to vibrations 
as low as possible. Examples of mea-
sures to reduce vibration exposure are 
the wearing of gloves when using the 
tool and limiting the working hours. For 
this purpose all parts of the operating 
cycle have to be considered (for ex-
ample, times when the electric tool is 
switched off and times when it is swit-
ched on but running without any load).

Notes on safety

 Caution! When using power tools, 

observe the following basic safety 
measures for the prevention of electric 

shocks and the risk of injury and ire.

Please read all these instructions 
before using this electric tool and 
please keep the safety instructions.

Symbols and icons

Symbols on the device:

 Warning!

  Read the manual!

  Wear eye protection

Wear breathing protection