9
GB
IE
NI
CY
ing certain wood and metals
represents a danger to the op-
erator and people who are close
by. Keep persons nearby away
from the hazard area.
Eyes should
be protected from the foreign matter,
which can be caused to fly during the
various applications. Dust or breath-
ing masks should filter the dust that is
created during operation. Wear hear-
ing protection in addition. If you are
exposed to loud noise for a long time,
you may suffer hearing loss. Wear
protective gloves in addition where ap-
propriate.
• If the supply cord of this power tool
is damaged, it must be replaced by
a specially prepared cord available
through the service organization.
• This device is not intended for
use by people with restricted
physical, sensory or mental fac-
ulties or those who do not have
sufficient experience or knowl
-
edge of it.
• Do not allow yourself to be
lulled into a false feeling of se-
curity and do not disregard the
safety rules for power tools,
even if you are familiar with the
power tool after using it many
times.
Acting carelessly can result in
serious injuries within fractions of a sec-
ond.
Residual risks
Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Lung damage, if suitable respiratory
protection is not worn;
b) Ear damage if working without ear pro-
tection.
c) Eye damage if no suitable eye protec-
tion is worn.
d) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the risk
of serious or lethal injuries, we rec-
ommend that persons with medical
implants consult their doctor and
the manufacturer of their medical
implant before operating the ma-
chine.
Operation
Caution! Risk of injury!
- Always remove the mains plug
before working on the tool.
The mains cable is to run over the
user’s shoulder during the use of the
polishing machine to avoid contact
with the polished surface. This is to
prevent scratches from the mains
cable.
Summary of Contents for UPM 120 B3
Page 3: ...1 2 3 5 4 6 ...
Page 36: ...36 ...
Page 40: ...40 ...
Page 41: ...41 20191217_rev02_mt ...
