Quick Operation Guide of DS-7200-SH/SV Series DVR
1. Disconnect pluggable block from the ALARM IN /ALARM OUT terminal block.
2. Press and hold the orange part of the pluggable block; insert signal cables into slots and release the orange part.
Ensure signal cables are in tight.
3. Connect pluggable block back into terminal block.
RS-485 Connections
To connect RS-485 devices (e.g., pan/tilt unit) to the DVR:
Press and hold the orange part of the pluggable block; insert signal cables into slots and release the orange part.
Ensure signal cables are in tight.
Note:
Make sure the pan/tilt receiver unit is connected to the D+ and D- of the RS-485 terminal of DVR.
6
Summary of Contents for DS-7204HVI-SH
Page 1: ...Quick Operation Guide Ultimax 1200 Ultimax 1300 Ultimax 1400...
Page 9: ...Quick Operation Guide of DS 7200 SH SV Series DVR Table 4 Specifications for DS 7200HVI SH 9...
Page 12: ...Quick Operation Guide of DS 7200 SH SV Series DVR Table 6 Specifications for DS 7200HWI SH 12...
Page 14: ...Quick Operation Guide of DS 7200 SH SV Series DVR 14...
