15
6. Start-up
6.1. Initial Operation
Unpack the
Filtertrolley 2.0 and set it up.
- unlock the black draw latches on its side and take off the cover
- check the tightness of the filter cassette
- put the cover back onto the device and lock the draw latches
Attention: Never operate the device without a filter!
- Connect the device with an electrical outlet of alternating current and 230 V/50 Hz.
Protect the electrical outlet with a fuse of at least 6A.
- Check whether the device type meets your requirements and suits your application.
6.2. Device Set Up and Connection
This picture shows the Filtertrolley 2.0 lying on
the ground. You can rotate the suck-in plate so
that the suction flange meets your requirements.
The
Filtertrolley 2.0 may be
operated standing or lying.
