ULTJUMBO Filtertrolley 2.0, User Manual

5 

2.1.1. Filtertrolley 2.0 LRA 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Filter system:  multi-level filter 

- sublimation pre-filter 

metal filter 

  - 

pre-filter 

  replacement 

frame 

      with 

filter 

mat 

F5 

      and 

filter 

mat 

F7 

  - 

absolute 

filter 

 HEPA 

filter 

H13 

- adsorption - gas filter 

adsorption filter 

 
The combination of sublimation-, pre-, absolute- and adsorption filters guarantees an 
efficiency of more than 99% due to multiple cleaning stages, provided that the filter is 
maintained and replaced regularly. 
 
Use and Application 
 
The suction and filter device Filtertrolley 2.0 LRA is suitable for removing and filtering 
soldering smoke, in particular: 

-    for hand soldering 
-

for robot soldering   

-

at special work places 

 
The Filtertrolley 2.0 LRA may be used for direct suction cleaning at the soldering tip (e.g. 
robot) as well as in combination with joint suction arms. 
Soldering processes generate a lot of soldering smoke (fine dust from soldering flux, gases, 
vapours, fumes, and others). Therefore, certain rules for the design and the equipment of 
working environments have to be observed. Soldering smoke and gases of vaporising solvents 
and activators as well as their decomposition products are mainly inhaled trough the 
respiratory tract. Most components of soldering smoke and gases are hazardous to our health. 
As a result of their inhalation, such components can badly harm the respiratory tract. 
Therefore, these hazardous substances have to be captured directly where they originate.