13
USB copy
Ensure the USB stick does not exceed 16GB.
The unit must be connectedto a TV screen to access the USB copyfunction.
Connectit to a TV usingthe yellow, red and white connections on the rear of the unit to the AV input
on a TV.
The TV must then be turned on and on the correct AV channelwith the unit turned on.
1. Add a CD disc to the CD tray and then close the CD tray. The CD will be read and then will
beginplayback.
2. Place a USB stick into the USB port on the unit.
3. Press the SUB/REC button on the remote control. The music playbackwill stop.
4. The copying interface will be shown on the TV screen.
Use the directional arrow buttons on the remote control to move between different settings
and make adjustments, when that settingis highlighted:
SPEED: Press the enter button on the remote control to change between normal and fast
speed. Normal speed is recommended.
BITRATE: Press the enter button on the remote control to change between
128/192/256/320/96/112 kbps. 128 kbps is recommended.
CREATE ID3: Press the enter buttonon the remote control to change between YES or NO.
An ID3 tag will only be created if the data is already on the music file whichyou were copying.
If the data is not already there, it cannot be copied, even if you choose the yes option.
DEVICE: USB is the only optionfor this system.
5. Use the arrow directional button on the remote control to move to the right of the screen to
select certain tracks to be copiedonto the USB stick.
When your chosen track number is highlighted on the screen, press the enter button on the
remote control.
You couldalso arrow down further to select all or select none.
6. When you are ready to copy, use the arrow buttons on the remote control so that START is
highlighted on the screen.
Then press the ENTER button on the remote control.
The unit will read the CD disc.
The copyingprocess will begin.
7. To stop the recording process, press the PLAY/PAUSEbutton on the remote control.
