1
English
LOCATION OF CONTROLS
1. POWER / SOURCE BUTTON
2. SKIP - / TUNE -
3. SKIP + / TUNE +
4. VOLUME - / ALARM 1
5. / ALARM 2
6. TIME / MEM / PLAY MODE
7. PLAY / PAUSE
8. STOP
9. SNOOZE
10. USB PORT
11. SD CARD PORT
12. AUX -IN SOCKET
13. HEADPHONES OUT
14. ANTENNA
15. AC PLUG
16. BATTERY COMPARTMENT
PRECAUTION
INSTRUCTIONS
- All the safety and operating instructions should be read before the
radio is operated. The manual should be retained for future reference.
HEED WARNINGS
- All warnings on the appliance and in the operating instructions
should be adhered to.
WATER AND MOISTURE
- The appliance should not be used near liquids or in rooms
with a high level of humidity.
VENTILATION
- The appliance should be situated so that its location or position does
not interfere with its proper ventilation.
HEAT
- The appliance should be situated away from heat sources such as radiators,
stoves or other appliances that produce heat.
POWER SOURCE
- The radio should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
POWER CORD PROTECTION
- Power supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon/against them.
OBJECT AND LIQUID ENTRY
- Care should be taken so that objects do not fall on or
liquids are not spilled into the enclosure through openings.
DAMAGE REQUIRING SERVICE
The appliance should be serviced by qualified service personnel when:
-
The power supply cord or plug has been damaged;
-
Objects have fallen into or liquids have been spilled onto the radio;
-
The appliance has been exposed to rain;
-
The appliance has been dropped or the enclosure damaged;
-
The appliance does not appear to operate normally.
SERVICING
- The user should not attempt to service the appliance beyond of what is
described in the user operating instructions. All the servicing should be referred to qualified
service personnel.
Note:
If the display does not function properly or no reaction to operation of any control
may be due to the electrostatic discharge. Switch off and disconnect the AC cord and remove
all the batteries, then turn the power back on after a few seconds.
