3
English
2. Press the
[SLEEP]
button (8) repeatedly to set the desired timer.
Note:
To remove the sleep timer repeat above steps and select “ Sleep OFF” .
TO USE THE RADIO
1. Press the
[POWER
]]
button (1) to power on the unit;
2. Select the desired audio source by pressing the
[SOURCE]
button (1) repeatedly;
3. (Please see detailed instructions for each Source in the following chapters);
4. Adjust the volume with the
[VOLUME -/+]
buttons (4/5) to the desired
level;
5. Press & hold the
[POWER]
button (1) to turn OFF the unit.
FM RADIO OPERATION
1. Select “FM” mode by pressing the
[SOURCE
]]
button (1) repeatedly ;
2. Use the
[SKIP -/+]
buttons (2/3) to fine tune
your desired station
in a step of 0.05
MHz or
press and hold the
[SKIP -/+]
buttons (2/3) to scan the next/previous
available station.
Note:
For a better reception, reorient the antenna (14).
PRESET
You can program a maximum of 30 preset radio stations.
1. Select your favourite station as explained before;
2. Press and hold
[MEM]
button (6). “P_ _” will appear on display;
3. Press
[SKIP -/+]
(2/3) to select the preset number;
4. Press
[MEM]
(6) to confirm.
RECALL A PRESET STATION:
1. Press the
[MEM]
button (6);
2. Press
[SKIP -/+]
(2/3) to select the preset number.
USB/SD OPERATION
1. Plug a USB stick
(max. 64 GB)
or an SD card into the [
USB/SD PORT
] (10/11);
2.
The radio will automatically switch to “USB or SD” mode and playback will start
automatically from the first track.
Notes:
• Some mp3 players may not be able to play via the usb port.
This is not a malfunction of the system.
• To avoid damage to USB memory, remove it only when the radio is turned off.
• The USB port is not designed for charging smartphones or other devices.
REPEAT -
RANDOM
Press
[PLAY MODE]
button (6) repeatedly
to select the desired playback mode
AUX IN OPERATION
1. Select “AUX” mode by pressing the
[SOURCE
]]
button (1) repeatedly;
2.
Use one male to male 3.5mm jack cable (not included) to connect any external
audio device to the
[AUX - IN SOCKET]
(12).
Note:
Music control (play, pause, etc) must be done from your external device.
