SYSTEM SET UP
SYSTEM
INPUT LOW
REST TIME
LCD LIGHT
11.0V
KEY BUZZER
SAFETY
OPTION
BACK
ABOUT
RESET
SYSTEM
10min
8
ON
ON
ITEM
SELECTION
DESCRIPTION
CAPACITY
CUT OFF
SAFETY
TIME
TEMP
CUT OFF
This program sets the maximum charge capacity that will be
supplied to the battery during charge. If the delta peak voltage
is not detected nor the safety timer expired by any reason, this
feature will automatically stop the process at the selected
capacity value.
When you start a charge process, the integral safety timer
automatically starts running at the same time. This is
programmed to prevent overcharge the battery if it proves to
be faulty, or if the termination circuit cannot detect the battery
full. The value for the safety timer should be generous enough
to allow a full charge of the battery.
The battery's internal chemical reaction will cause the
temperature of the battery to rise. If the temperature limit is
reached, the process will be terminated.
OFF
100-20000 mAh
OFF
1-720 Min
20 C/68 F -
80 C/176 F
Please touch “TIME OFF” and “CAPS OFF” screen to make the functions ON or OFF. And touch
“+” and “-” to get the proper parameter.
NOTE: The TEMP CUT OFF function can not be OFF.
1
9
1
2
SYSTEM\SAFETY SETTING
120min
79 C/174 F
BACK
TIME
OFF
5000mAh
CAPS
OFF
TEMP.
