Ultra Power UP100AC QUAD Instruction Manual Download

Page: 2 / 32

Warning and Safety Notes........................................................................2

Introduction...............................................................................................4

Specification..............................................................................................4

Special Features.......................................................................................6

Warning and Safety Notes........................................................................9

Lithium Battery Connection Diagram......................................................11

Program Flow Chart................................................................................13

Lithium Battery(LiPo/LiFe/LiIon)Program................................................14

Charging Lithium Battery at Balance Mode............................................14

Charging of Lithium Battery.....................................................................15

'Fast' Charging of Lithium Battery...........................................................16

'Storage' Control of Lithium Battery.........................................................17

Discharging Lithium Battery....................................................................18

Pb Battery Program.................................................................................19

Charging of Pb Battery...........................................................................19

Discharging of Pb Battery.......................................................................19

NiMH/NiCD Battery Program..................................................................20

Charging of NiMH/NiCD Battery.............................................................20

Charging NiMH/NiCD Battery in the Auto Charge Mode........................20

Charging NiMH/NiCD Battery in re-peak Charge Mode.........................21

Discharging of NiMH/NiCD Battery.........................................................21

Charge/Discharge & Discharge/Charge Cycle of NiMH/NiCD Battery....22

Battery Memory Set................................................................................23

Lithium Battery Meter..............................................................................25

System Set up.........................................................................................26

Various Information During the Process.................................................28

Warning and Error Message...................................................................29

Warranty and Service.............................................................................30

TABLE OF CONTENTS

Summary of Contents for UP100AC QUAD

































Search results

Summary of Contents for UP100AC QUAD

Reviews:

Related manuals for UP100AC QUAD

Brands by name

Popular brands

Ultra Power UP100AC QUAD, Instruction Manual

Search results

Summary of Contents for UP100AC QUAD

Reviews:

Related manuals for UP100AC QUAD

Brands by name

Popular brands