Ultra Power UP6, Instruction Manual

TASK SETTINGS

Power on the charger and connect a battery, the charger will enter 

into the standby page, then short press the roller wheel to activate 

the program setting menu. The items in the menu are as follows:

8

The default mode of the UP6 is series charging, therefore you must 

connect the output wires to the battery pack that you wish to charge. 

For lithium packs, it is highly recommended to ALWAYS connect the 

balance leads and utilize balance charging. Although the UP6 will 

charge without the balance function, a warning tone will sound to 

alert you that the balance connector is not in use.

Current

Select desired charge current (0.1-10.0A) , discharge current (0.1-2.0A)/Ext.discharge(0.1-15.0A)

Mode

Work mode: Charge / Discharge / Storage / Ext.DISC

Battery

Select battery chemistry

Back

Return to previous screen or function

TVC

Terminal voltage control

Start

Begin process

Cells

Select number of battery pack cells 

When selecting the storage function, the UP6 will automatically 

begin charging if the battery pack voltage is below the ideal storage 

voltage. Likewise, the UP6 will automatically enter the discharge 

mode if the battery pack voltage is higher than the ideal storage 

voltage.

Storage