background image

2

   

WARNINGS

Ultra Pure humidifiers are advanced products, whose operation is specified in 

the technical documentation supplied with the product or can be downloaded, 

even prior to purchase, from the website www.ultrapureus.com. Each ultra 

pure product, in relation to its advanced level of technology, requires setup/

configuration/programming/commissioning to be able to operate in the 

best possible way for the specific application. The failure to complete such 

operations, which are required/indicated in the user manual, may cause the 

final product to malfunction; Ultra Pure accepts no liability in such cases. The 

customer (manufacturer, developer or installer of the final equipment) accepts 

all liability and risk relating to the configuration of the product in order to 

reach the expected results in relation to the specific final installation and/or 

equipment. Ultra Pure may, based on specific agreements, act as a consultant 

for the installation/commissioning/use of the unit, however in no case does 

it accept liability for the correct operation of the humidifier and the final 

installation if the warnings or suggestions provided in this manual or in other 

product technical documents are not heeded. In addition to observing the 

above warnings and suggestions, the following warnings must be heeded for 

the correct use of the product: 

DANGER OF ELECTRIC SHOCK: 

The humidifier contains live electrical components. 

Disconnect the mains power supply before accessing inside parts or during 

maintenance and installation.

DANGER OF WATER LEAKS:

 

 The humidifier automatically and constantly fills/drains 

certain quantities of water. Malfunctions in the connections or in the humidifier 
may cause leaks.

  

IMPORTANT

Ulltra Pure compact is a component integrated in various applications. Its

installation requires the installer inserts appropriate protections against

direct contact with parts carrying dangerous voltages . Nobody should 

have access to parts with dangerous voltage during normal operation of the 

humidifier. 

Environmental and power supply conditions must conform to the values

specified on the product rating labels. 

The product is designed exclusively to humidify rooms directly.

Only qualified personnel who are aware of the necessary precautions and

able to perform the required operations correctly may install, operate or

carry out technical service on the product. 

Only water with the characteristics indicated in this manual must be used for 

water vapor production. 

All operations on the product must be carried out according to the instructions 

provided in this manual and on the labels applied to the product. Any uses

or modifications that are not authorized by the manufacturer are considered 

improper. Ultra Pure declines all liability for any such unauthorized use. 

Do not attempt to open the humidifier in ways other than those specified

in the manual.

Observe the standards in force in the place where the humidifier is installed.

Keep the humidifier out of the reach of children and animals. 

Do not install and use the product near objects that may be damaged when 

in contact with water (or condensate). Ultra Pure declines all liability for

direct or indirect damage following water leaks from the humidifier. 

Do not use corrosive chemicals, solvents or aggressive detergents to clean

the inside and outside parts of the humidifier, unless specifically indicated

in the user manual.

Do not drop, hit or shake the humidifier, as the inside parts and the linings

may become inoperable..

Ultra Pure adopts a policy of continual development. Consequently,

Ultra Pure reserves the right to make changes and improvements to any

product described in this document without prior warning. The technical

specifications shown in the manual may be changed without prior warning. 

The liability of  Ultra Pure in relation to its products is specified in the 

Ultra Pure general contract conditions, available on the website www.

ultrapureus.com and/or by specific agreements with customers; specifically, 

to the extent where allowed by applicable legislation, in no case will Ultra

Pure, its employees or subsidiaries be liable for any lost earnings or sales,

losses of data and information, costs of replacement goods or services,

damage to things or people, downtime or any direct, indirect, incidental,

actual, punitive, exemplary, special or consequential damage of any kind

whatsoever, whether contractual, extra-contractual or due to negligence, or 

any other liabilities deriving from the installation, use or impossibility to use 

the product, even if Ultra Pure or its subsidiaries are warned of the possibility 
of such damage.

WARRANTY ON MATERIALS: 2 YEARS.  WARRANTY PERIOD STARTS NO 

LATER THEN 90 DAYS FROM DELIVERY OF EQUIPMENT AND NOT 

WHEN EQUIPMENT IS STARTED

DI WATER IS ESSENTAIL FOR PROPER OPERATION. ANY OTHER FORM

 OF WATER VOIDS WARRANTY. ULTRA PURE TAKES NO 

RESPONSIBILITY TO ANY FOREIGN DEBREE IN AIR OR INSIDE 

ULTRA SONIC HUMIDIFIER DUE TO HARDNESS OF WATER OR ANY

 CONTAMINENTS IN WATER SUPPLY. 

Summary of Contents for pureMist



























Reviews: