ULTRA REEF
www.ultrareef.it
5
INSTALLATION & USE
To turn on the pump, keep the (+) key pressed for 3".
As a test, all the LEDs light up for a few seconds. The
pump starts at 30% of the operating range.
By pressing the (+) and (-) keys, it is possible to increase
or decrease the pump flow. Consequently, the light
intensity of the five LEDs will vary.
To turn off the pump, keep the (+) key pressed for 3”.
The supplied Controller can only regulate the flow, can
only be powered with the supplied transformer and
manages only the supplied pump. Any other use could
irreparably damage the device and void the warranty.
APP CONTRALL
The pump symbol will light up in the colour set through
the CONTRALL application.
The Wi-Fi symbol flashes blue slowly because it is
waiting to be connected to the Wi-Fi network via the
CONTRALL app.
If the pump is managed through the CONTRALL
application, it will not be possible to change its
operation using the controller. It will only be possible to
turn it off by keeping the (+) key pressed for 3”.
Configuration via APP CONTRALL:
1.
Download the CONTRALL application for free.
2.
Select MY DEVICES and press the + symbol at the
top right.
3.
Select PSK SDC and Model 3.0 or 2600-4000.
4.
Read the text and press PROCEED.
5.
Identify the Wi.Fi network to which you want to
connect the pump and enter the network
password
6.
Register the pump with a name and press DONE.
THE
PRODUCER
ULTRA POMPE S.r.l.
Via Goldoni 37 | CAP/ZIP 20090
Trezzano sul Naviglio (MI) | ITALY
Phone ++39 (0)2.48.46.45.52
Info@ultrapompe.it
Info@ultrareef.it
