background image

PAGE 20

95 SERIES

OWNERS MANUAL

PROGRAMMING

RUN TIME ADJUSTMENT

UL

TRA

M-1234

PROGRAM

TO ENTER PROGRAM  MODE

 

PRESS AND HOLD THE STATUS BUTTON ON THE
REMOTE FOR 4 SECONDS.
THE REMOTE WILL BEEP 3 TIMES THEN DISPLAY 
“PROGRAM” & “M-1234". PRESS START TO CONTINUE.

RUN TIME ADJUSTMENT 

PRESS UNLOCK BUTTON TO CHANGE TO 4 MINUTES.
PRESS START BUTTON TO CHANGE TO 45 MINUTES.
PRESS STATUS TO EXIT.

PRESS START TO GO TO RUN TIME ADJUSTMENT

TEMP START ADJUSTMENT

UL

TRA

M-1234

PROGRAM

UL

TRA

TIMER

PROGRAM

ON

TO ENTER PROGRAM  MODE

 

PRESS AND HOLD THE STATUS BUTTON ON THE
REMOTE FOR 4 SECONDS.
THE REMOTE WILL BEEP 3 TIMES THEN DISPLAY 
“PROGRAM” & “M-1234". PRESS TRUNK TO CONTINUE.

TEMP ADJUSTMENT 

PRESS THE UNLOCK OR START BUTTONS TO SCROLL 
THROUGH THE SETTINGS.
TEMP 1- THE SYSTEM WILL START AT 0C / 32F
TEMP 2- 
TEMP 3- 
TEMP 4- 

THE SYSTEM WILL START AT -5C / 23F
THE SYSTEM WILL START AT -15C / 5F
THE SYSTEM WILL START AT -25C / 13F

UL

TRA

TEMP 1

PROGRAM

ON

PRESS TRUNK TO GO TO TEMP ADJUSTMENT

UL

TRA

TIMER

PROGRAM

ON

UL

TRA

RUN 15

PROGRAM

ON

*TEMP MODE IS TURNED ON OR OFF BY HOLDING THE LOCK AND START BUTTONS FOR 5 SECONDS.
THE TEMP SENSOR MUST BE INSTALLED FOR THIS FEATURE TO OPERATE.

PAGE 21

95 SERIES

OWNERS MANUAL

THIS FEATURE IS USED TO DEACTIVATE THE REMOTE START AND ALARM (ALARM 
MODELS ONLY) IF THE VEHICLE REQUIRES SERVICING OR IF THE REMOTE IS LOST OR 
DAMAGED WHILE THE ALARM IS IN ARMED STATE. 

ENTER THE VEHICLE THEN TURN THE IGNITION KEY TO THE ON 
POSITION.
(LEAVE IN THE ON POSITION)

WITHIN 3 SECONDS PRESS AND HOLD THE VALET SWITCH FOR 8-15 
SECONDS*
*DEPENDS ON “VALET OPTIONS” PROGRAM OPTION. 

ACTIVATING VALET MODE/ EMERGENCY OVERRIDE.

THE HORN WILL CHIRP 5 TIMES AS CONFIRMATION THAT THE 
SYSTEM HAS ENTERED VALET/ EMERGENCY OVERRIDE MODE.

THE LCD WILL DISPLAY VALET AFTER A FUNCTION IS PREFORMED.
THE LEDS ON THE ANTENNA WILL TURN ON SOLID.  

ENTER THE VEHICLE THEN TURN THE IGNITION KEY TO THE ON 
POSITION.
(LEAVE IN THE ON POSITION)

WITHIN 3 SECONDS PRESS AND HOLD THE VALET SWITCH FOR 8-15 
SECONDS*
*DEPENDS ON “VALET OPTIONS” PROGRAM OPTION. 

THE HORN WILL CHIRP 2 TIMES AS CONFIRMATION THAT THE 
SYSTEM HAS EXITED VALET/ 

OVERRIDE MODE. 

EMERGENCY 

THE LEDS ON THE ANTENNA WILL TURN OFF.  

VALET / EMERGENCY OVERRIDE MODE

PROGRAMMING

Summary of Contents for 3295 SERIES

























Reviews: